046 9020 625

Lumatek VF120W LED Light Bar

265.00
1 left in stock
Lumatek has innovated again and come up with the ideal LED fixture for Seedlings, Clones and for any low PPFD target plants. Meet the new VF120W, with Vertical Farming Range (VF Range)

Out of stock

Description

Lumatek VF120w Led light bar

These versatile high efficacy fixtures will ensure you reach your goals when used in Vertical Farming applications. From propagation factories and nurseries, climate chambers, warehouse farms, containers, between others, the Lumatek VF range will deliver the adequate light quality spectral and photon flux levels you need.

The VF120W comprises of four 30W LED bars with 4000K White and 3000K Warm White diodes, with a total PPF output of 308 μmol/s and a 2.4 μmol/J Efficacy.

The VF range already includes the new cllear Glue protection cover technology on the LED bars; resulting in higher light transmittance of 99% without light loss, extended lifetime of diodes, extra corrosion resistance and high waterproof of IP65. For basic maintenance, simply clean the bars with wet cotton.

The fixture will require a 650W Driver (sold separately) that can run up to 5 units of VF120W fixtures, and can be dimmed with a 0-10V Light Dimmer (also sold separately) or externally controlled with our Digital Panel Plus 2.0 or any other Universal Controller 0-10V. Also, the daisy-chain driver connectivity is possible if you would like to add more units to your system so you can dim all fixture with a single dimmer.

External Control

This Lumatek LED fixture can also be externally controlled with a Lumatek digital lighting controller (Digital Panel Plus 2.0) featuring light timing, automated dimming (1% increments), temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.

Lumatek Control Panel Plus 2.0

Universal Control Systems Compatibility

Lumatek LED Fixtures can be fully controlled with either the Lumatek Digital Panel Plus 2.0 or with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.

For large facilities, where the 3-Phase electrical supply domains, a 400 Volts, 650W Driver is more suitable.


More Lumatek products

Additional Info

KEY SPECIFICATIONS

PRODUCT CODE: LUMLED015
EFFICACY: 2.4 μmol/J
PPF: 308 μmol/s
INPUT VOLTAGE: 220-240V, 50-60Hz
INPUT VOLTAGE (LARGE FACILITIES DRIVER): 277-480V, 50-60Hz
INPUT POWER (100%): 130W @ 230V
WATERPROOF: IP65
LIFETIME: +60000hrs
LIGHT DISTRIBUTION: 120º
LIGHT SOURCE: High Spec White & Warm White Diodes
THERMAL MANAGEMENT: Passive Cooling
DIMMABLE: OFF-25-50-75-100% with Dimmer connected to the main 600W driver
EXTERNAL CONTROL: Lumatek Digital Panel Plus 2.0 or Universal Controllers 0-10V
DRIVER: 650W Driver (Sold Separately), each one can run of to 5 x VF120W Fixtures
WEIGHT: 2.1Kg
DIMENSIONS: 1207 x 521 x 20.5mm
FOOTPRINT: 1.2 x 0.5 m

You may also like:

€2.75
From €45.00
From €0.25
New
From €33.00
© 2021 Growshop.ie web design by dmac media