This device allows the user to control the speed of a fan from 0 - 100% without the temperature sensor.
With (NTC) temp sensor, the user can set a desired temperature. When the device controls the fan in a way to keep that temperature within the grow room.
The Smart Controller uses SMSCOM's Motion Flow software, therefore it reacts differently to the usual types of fan speed controllers.
When you first use the Smart Controller, it needs 5 to 10 minutes to scan your room.
Then makes an evaluation for the correct running speed for your fan.
After this time, the controller knows the exact speed your fan needs to run to keep temperature.
From then on, the Smart Controller will make changes to the fans speed to maintain the set temperature.
The Smart Controller has 60 speed settings, meaning the fan speed control is very smooth. The temperature control is the most accurate out of any type of controller.
Set your temperature (if using the temperature sensor) and minimum fan speed. The controller will take care of the rest.
Regulates fan speed, motion flow, continuous regulation
Plug and play, automatic if using the NTC
Max. capacity 6.5 A with a 5 year warranty
Connecting fans that exceed the 6.5A or 100 watts power limit will cause damage to the Smart Controller.
This device controls the fan speed as set by the user. With an SMSCOM NTC Temperature Sensor then the device will control its own speed to match a temperature set by the user.
